Welcome to www.agpgames.com ---- HANGZHOU KinCony ELECTRONICS CO.,LTD.
About Us Contact Us          Our Patents Our Articles        Forum      SiteMap    Chinese Version

Chapter 1. Overview Chapter 2. Emulation Guide Chapter 3. Build Your First Project Chapter 4. In System Programming
Chapter 5. USB Interface Installation Chapter 6. LED Display Application Chapter 9. FAQ Chapter 10. System Configuration and Service
 
Chapter 7. Basic Experiments
7.1. Experiment with LED 7.2. Experiment with Flowing LEDs 7.3. Experiment with Keys 7.4. Experiment with Beeper
7.5. Experiment with Relay 7.6. Experiment with LED Display 7.7. Experiment with Serial Port  
 
8.1. Experiment with Matrix Key 8.2. Experiment with Stepping Motor 8.3. Experiment with 1-Wire Digital Thermometer DS18B20
8.4. Experiment with 24C01 EEPROM 8.5. Experiment with 93C46 Serial EEPROM 8.6. Experiment with DS1302 Real-time Clock
8.7. Experiment with 8-bit Serial AD Converter ADC0832 8.8. Experiment with 1602 Character LCD Module 8.9. Experiment with 12864 Graphic LCD
8.10. Experiment with Infra-red Remote Controller 8.11. Experiment with Wireless Encoding Module Chapter 11. User Feedback

Chapter 2. Emulation Guide

Keil uVision will be a little bit difficult to learners. Please read the below instruction carefully.

The SST89E516RD is used for emulation in KinCony 8051 MCU Development Platform. Working with Keil software, onboard emulation and target board emulation (via 40-pin interface) are all very easy.

Emulation chip: 89C51, 89C52, 89S51, 89S52, 89C58, and other 8051 core MCU.

Keil C51 IDE.

Small size monitor program. No on-chip resource required at full speed running.

On-chip 64k ROM with ISP function.

Step/step over, breakpoint set, full speed run, variable reference.

Programming language: pure assemble, pure C, C mixed with assemble.

The emulator hear can be connected to any experiment board, or target board.

Hardware Installation

Hook the 9-pin serial port up with the serial port on PC, e.g. COM1. Then hook the USB cable or external power supply cable, and plug in the emulator into the 40-pin burn-in socket. If you wish to emulate in your target board, use the 40-pin cable to connect the emulator and your target board.

Software Installation

The accessory CD contains Keil uVision 3 evaluation version.

Execute Setup.exe to start installation. No parameter needs to be changed. Click ‘next’ to finish the installation. For detailed instruction, please read the documents in CD.

After installation, click ‘start’ – ‘Programs’ - ‘Keil uVision 3’ to run the Keil.

Emulation Keil uVision will be a little bit difficult to learners. Please read the below instruction carefully.

The SST89E516RD is used for emulation in KinCony 8051 MCU Development Platform. Working with Keil software, onboard emulation and target board emulation (via 40-pin interface) are all very easy.

Emulation chip: 89C51, 89C52, 89S51, 89S52, 89C58, and other 8051 core MCU.

Keil C51 IDE.

Small size monitor program. No on-chip resource required at full speed running.

On-chip 64k ROM with ISP function.

Step/step over, breakpoint set, full speed run, variable reference.

Programming language: pure assemble, pure C, C mixed with assemble.

The emulator hear can be connected to any experiment board, or target board.

Hardware Installation

Hook the 9-pin serial port up with the serial port on PC, e.g. COM1. Then hook the USB cable or external power supply cable, and plug in the emulator into the 40-pin burn-in socket. If you wish to emulate in your target board, use the 40-pin cable to connect the emulator and your target board.

Software Installation

The accessory CD contains Keil uVision 3 evaluation version.

Execute Setup.exe to start installation. No parameter needs to be changed. Click ‘next’ to finish the installation. For detailed instruction, please read the documents in CD.

After installation, click ‘start’ – ‘Programs’ - ‘Keil uVision 3’ to run the Keil.

 



COPYRIGHT2003--2008 HANGZHOU KinCony ELECTRONICS CO.,LTD. All Rights Reserved

Add:Rm 11-3-702, Pujing Jiayuan, Gongshu District, Hangzhou, Zhejiang, China.
Tel:+86-0571-87615070,Fax:+86-0571-87615070 E-mail: hificat@163.com  ICQ:164806453  Webmaster:Hificat